3LT Logo Complete Black.jpg

ACCESSORIES

Footwear, headwear and everything else...


FOOTWEAR

With four different options to choose from, we've got you covered in even the harshest of environments.

Our range of footwear is designed to provide security and stability in the harshest of environments. With o rings and universal dual threads, our footwear will fit any 1/4" or 3/8" thread.

BOOTZ

Tough, durable rubber feet for general use in most day to day circumstances. Will provide solid footing for your tripod. Dual 1/4" and 3/8" threads.

HEELZ

Precision milled stainless steel spikes for use on concrete, gravel and other hard surfaces. With dual 1/4" and 3/8" threads.

STILETTOZ

Designed for protecting your tripod legs by elevating them above rocky or mucky surfaces, Stilettoz also prove useful for anchoring your tripod into softer ground, or better grip on hard terrain. With dual 1/4" and 3/8" threads.

CLAWZ

The perfect solution for use on ice , rocks and uneven surfaces. Ultimate grip and stability. Also for use on malleable terrain such as snow and sand, for spreading the load and preventing sinking. Dual 1/4" and 3/8" threads.

DOCZ

Our monopod stabiliser foot is precision engineered for smooth movement, and greater control, with tension adjustment and locking ball.


HEADWEAR

With two clamps and four release plate options, there's a solution available for almost everyone.

We have a range of release plates to suit different scenarios and requirements, with a range of compatibilities.

QR4

A 38mm square release plate, with security screws for peace of mind and safer use. Arca Swiss compatible, with corner holes for Peak Design Anchors.

QR7

62mm x 38mm release plate, Arca Swiss compatible, with adjustable camera screw slot, security screws for safety, and additional strap connector.

360-CLAMP

The 360-CL is designed to fit most ball heads. With panoramic base, and Arca Swiss mount, security recesses and an inset spirit level, this clamp can also be mounted on any 3/8" devices, like monopods or tripods.

SWITCH CLAMP

The Switch Clamp is a lever-operated clamp, which can be adjusted to suit various plates. Configurable for left and right handed use, with security recesses and spirit level, it can be mounted on any 3/8" device or compatible ball head.


Universal L - BRACKETS

Our QR11's are a global leader in Universal L Bracket technology, with multiple functions and mounts.

Our universal L brackets are designed for compatibility with most modern DLSR cameras, and a high proportion of mirrorless cameras. Click through to the QR11 page for dedicated information on compatibility.

Full compatibility list can be found here: www.3leggedthing.com/qr11.html

One of the most common questions we receive is about compatibility with cameras. This guide is designed to show you what you should expect. The QR11-LC & LG fits most modern cameras, but may require some adjustment or compromise. The QR11-FBC & FBG will fit most full-body DLSRs and Gripped Cameras and are excluded from this chart.

QR11-LC

Anodized in Equinox Copper colour, with adjustable base screw, side opening for cable door access, and strap connectors on the base and upright ends.

QR11-LG

Anodized in Eclipse Metallic Slate colour, with adjustable base screw, side opening for cable door access, and strap connectors on the base and upright ends.

QR11-FBC

Designed for gripped or full-bodied cameras, with adjustable base screw, side opening for cable door access, and strap connectors on the base and upright ends.

QR11-FBG

Designed for gripped or full-bodied cameras, with adjustable base screw, side opening for cable door access, and strap connectors on the base and upright ends.


ZELDA L - BRACKETS

Dedicated L-BRacket for Nikon Z Series Cameras

A collaboration of elegance and function

Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras.

3LT-Zelda-slate-grey-10.jpg
3LT-Zelda-copper-9.jpg

Super Strength

Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer.

Sharp Styling

Anodized in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras.

Smart With Straps

Zelda is shaped ensuring a perfect fit around the camera’s strap connector, and the base includes an additional strap slot for easy attachment of hand straps. The vertical aspect includes a handy ¼”-20 screw thread which can be used with single-mount sling straps, or to attach a light or a microphone.

ZELDA-C

Zelda is the first camera-specific L-Bracket from 3 Legged Thing, designed to precisely fit Nikon’s Z series range of full frame mirrorless cameras.
Precision milled from a single block of aircraft-grade alloy, Zelda gives full access to the battery door, memory card slot, and side ports with the bracket in place.

ZELDA-G

Zelda is the first camera-specific L-Bracket from 3 Legged Thing, designed to precisely fit Nikon’s Z series range of full frame mirrorless cameras.
Precision milled from a single block of aircraft-grade alloy, Zelda gives full access to the battery door, memory card slot, and side ports with the bracket in place.


TOOLZ

Our universal tripod tool is the perfect companion for any photographer. Watch the video and see for yourself.

3 legged Thing 24450.jpg

TOOLZ

Our Toolz provide a universal solution for adjusting a number of photographic products, with a 4mm hex key, screwdriver (coin key), carabiner for connecting to bags and D rings, keyring and bottle opener.



Find a Product by Brand